Operating instructions
64426 A 03/35
page 8 - 14
4
Operation
Use the KS 1 or KS 3 grinder only in accordance with the instructions listed
under 1.3.
Never place fingers or objects into the grinding gears!
Never exceed the maximum allowable operating time of 40 minutes.
Afterwards, allow the motor to cool off for around 30-40 minutes prior to
switching the grinder on again.
4.1 Operating Controls
Start/Stop Switch
START
Pressing the START button initiates grinding only when a bag is in place
behind the spout. The switch will return to this position after a grind cycle has
begun and will remain in this position after grinding has ceased.
STOP
pressing the STOP button stops the operation of the grinder.
Grind Selector
Allows the user to vary the grind for each bag of coffee. The grind ranges indicated on the
label allow a very precise grind control. The grinding results may very substantially for
different types and roasts of coffee.
Bag Detector
Prevents the grinder from operating unless the back of a bag is in place behind the spout.
This is also a safety device. Please do not attempt to by-pass the bag detector (not visible).
The grinder must only be installed in dry areas!
Place the coffee grinder on a firm, level and non-slip base. Danger of tipping
and slipping on unstable surfaces. Before connecting the coffee grinder to the
mains supply, ensure that this supply corresponds with the data on the unit
nameplate.
