Page 4
5.
Loosen the motor’s plug and socket. Carefully lift the built-in grind-
er out of the body.
6.
Vacuum-clean the grinder body. Do not damage any cable or elec-
trical board.
7.
Carefully insert the new built-in grinder with the brass ring into the
body. Make sure its feet slide into the slots in the base plate and
that the spout
fi
ts into the tube in the body.
8.
Reconnect the motor’s plug and socket. Carfully secure the con-
nection in the back of the body away from the disc casing.
9.
There are two factory-made red marks on the brass ring of the
built-in grinder:
Left red mark 1:
Zero grind adjustment,
fi
nest setting with minimal
distance between the discs just before touching
Right red mark 2:
Grind adjustment for
fi
tting the lid, which is put on
at the coarsest setting.
