DITECH DT5641, Инструкция по эксплуатации

Страница: 29 / 32

29
Resetting factory settings
DEU
ENG
DEU
1. Pull the device from the frame and the mounting plate.
2. Remove the batteries from the back of the device.
3. Insert two new batteries of the type R03/Micro/AAA accord-
ing to the marking.
4. Install the interchangeable frame onto the mounting plate.
5. Position the device onto the mounting plate and latch it into
the clips.
9 The device is now ready to operate.
9 Cleaning
Clean the device with a soft, clean, dry, and lint-free cloth. The
cloth may be moistened with lukewarm water for the removal
of heavier contamination. Use a solvent-free cleaning agent for
cleaning.
10 Resetting factory settings
All settings will be lost when the factory settings are restored.
1. Open the battery compartment (see „Teach-in of the device“
page 24).
2. Remove the battery.
3. Insert the battery into the battery compartment according
to the marking and simultaneously press the system key for
4 seconds until the LED flashes quickly in orange (see fig. 1