DITEC ENTREMATIC AS45, Руководство по установке

Страница: 15 / 34

15
IP2042EN ‡ 2012-07-24
2.24 ) asten detail [22] to pro ¿ le 80 situated above the wing
as shown in the diagram.
Note: ' uring the insta OO ation of the ¿[ ture, detai O >@ must E e
S ositioned in corres S ondence to its interna O connection with de
tai O >@ and the E rush 63$= must E e trimmed
, n addition, in order to o E tain the S ro S er E reakawa \ strength for
the ¿[ ed wing, use the O atera O screws to ad M ust detai O >@
2.2 During the installation of the ¿[ ture detail [2 ] must be
positioned in correspondence to the magnetic limit switch [1 ].
Drill the appropriate holes in order to fasten detail [2 ] to pro ¿ le
80 situated above the wing as shown in the diagram.
2.2 : ith PAM4 M pro ¿ les insert the glass [ ] into the ¿[ ed
wing as shown in the diagram.
A
A
2.27 Set the glass spacers [A] shown in the diagram so that
the \ provide proper support.
2.28 : ith PAM4 M pro ¿ les insert the seals into the glass-blo-
c N ing pro ¿ les [8] as shown in the diagram.
2.2 : ith PAM4 M pro ¿ les insert the glass-bloc N ing pro ¿ les
[8] onto the mobile wing until the \ clic N as shown in the dia-
gram.
2. 0 During the installation of the ¿[ ture position detail [24] in
correspondence to detail [11] on the ¿[ ed wing and fasten it to
the À oor so that it is aligned with the ¿[ ture as shown in the
diagram.
2. 1 During the installation of the ¿[ ture fasten pro ¿ le 1 00
to the À oor as shown in the PAM4 / AST or PAM4 M AST
manual.
Note: ' o not S aint S ro ¿O e after it has E een fastened to
the À oor