750 Tracker - CONTROLS
9
CONTROLS
750 Tracker - CONTROLS
9
CONTROLS
Depth + On/Off
Pressing these buttons when tracker is on cycles volume from low
to high to off. Pressing and holding depth button before turning
tracker on changes signal strength display. See “Signal Strength”
section later in this chapter for more information.
Depth + Fore/Aft/Left/Right
Pressing these buttons switches LCD backlight off and on.
Depth + Up
Pressing these buttons enters tracker into calibration mode. See
OPERATION for further information.
Depth + Down
Pressing these buttons selects radio channel. “CH-1” or “CH-2” or
“OFF” will appear in display.
Depth + Mode
Pressing these buttons changes depth units from default setting
of feet:inches to inches, centimeters, or meters.
On + Up
Holding up button and pressing on button switches left/right
arrows off and on.
On + Down
Holding down button and pressing on button switches all
guidance arrows off and on. NOTE: If all arrows are disabled,
remote guidance will not work.
Содержание Subsite 750
Страница 6: ...6 750 Tracker CONTENTS SERVICE PROCEDURE 6 750 Tracker CONTENTS SERVICE PROCEDURE...
Страница 20: ...20 750 Tracker SAFETY ALERTS 20 750 Tracker SAFETY ALERTS...
Страница 34: ...34 750 Tracker OPERATION 34 750 Tracker OPERATION...
Страница 36: ...36 750 Tracker MAINTENANCE 36 750 Tracker MAINTENANCE...