Ditch Witch RT80Q, Руководство оператора

Страница: 143 / 207

Service - 142
RT80Q Operator’s Manual
Recommended Lubricants/Service Key
Recommended Lubricants/Service Key
Item Description
Tier 4
DEO Diesel engine oil meeting or exceeding Deutz specification DQC III- LA.
NOTICE:
Shipped from factory with API CJ-4 DEO meeting Deutz specification DQC II-
LA. Change oil initially at 250 hours.
• Engine must use low sulfated ash, phosphorous, and sulfur (low SAPS) oil.
• See viscosity chart.
• If oils meeting only API CJ-4 or ACEA E6/E9 are used, service interval is reduced
to 250 hours.
Tier 3
DEO Diesel engine oil meeting or exceeding Deutz specification DQC III.
NOTICE:
Shipped from factory with API CJ-4 DEO meeting Deutz specification DQC II-
LA. Change oil initially at 100 hours if fuel sulphur content exceeds 500 ppm (500 mg/
kg). Otherwise, initial oil change should be at 250 hours.
• See viscosity chart.
• If oils meeting only API CJ-4 or ACEA E7 are used, service interval is reduced to
250 hours.
MPG
Multipurpose grease.
Use polyurea based NLGI GC‐LB Grade 1.5 or lithium based NLGI
GC‐LB Grade 2.
EPG
Extreme pressure grease.
Use polyurea based NLGI GC‐LB Grade 1.5 or lithium based
NLGI GC‐LB Grade 2, with extreme pressure additives.
MPL Multipurpose gear oil meeting API service classification GL-5 (SAE 80W90)
THF Tractor hydraulic fluid, similar to Phillips 66 PowerTran Fluid, Mobilfluid 423, Chevron
Tractor Hydraulic Fluid, Texaco TDH Oil, or equivalent
DEAC
Low silicate, fully formulated diesel engine antifreeze/coolant meeting
Deutz
specification DQC CB-14
, such as
Shell Rotella ELC NF
.
Check level of fluid or lubricant
Check condition
Filter
Change, replace.
Adjust, service, or test