background image

Safety - 12

RT80Q Operator’s Manual

Guidelines

Guidelines

When you see this safety alert sign, carefully read and follow all instructions. 

YOUR SAFETY IS AT STAKE.

 Read this entire section before using your equipment.

Follow these guidelines before operating any jobsite equipment:

Complete proper training and read operator’s manual before using equipment.

Mark proposed path with white paint and have underground utilities located before working. In the US 
or Canada, call 811 (US) or 888-258-0808 (US and Canada). Also contact any local utilities that do not 
participate in the One-Call service. In countries that do not have a One-Call service, contact all local 
utility companies to have underground utilities located. 

Classify jobsite based on its hazards and use correct tools and machinery, safety equipment, and work 
methods for jobsite.

Mark jobsite clearly and keep spectators away.

Wear personal protective equipment.

Review jobsite hazards, safety and emergency procedures, and individual responsibilities with all 
personnel before work begins. Safety videos are available from your Ditch Witch

®

 dealer or at 

www.ditchwitch.com/safe. Safety Data Sheets (SDS) are available at www.ditchwitch.com/support.

Fully inspect equipment before operating. Repair or replace any worn or damaged parts. Replace 
missing or damaged safety shields and safety signs. Contact your Ditch Witch dealer for assistance.

Use equipment carefully. Stop operation and investigate anything that does not look or feel right.

Do not operate machine where flammable gas may be present.

Only operate equipment in well-ventilated areas. 

Contact your Ditch Witch dealer if you have any question about operation, maintenance, or equipment 
use.

Complete the equipment checklist located at www.ditchwitch.com/safe.

California Proposition 65 Warning

This product may contain chemicals known to the State of California to cause cancer, birth defects, or other 
reproductive harm. 

battery posts, terminals and related accessories

engine exhaust

ethylene glycol

 

Содержание RT80Q
















































































































































































































Отзывы: