Ditch Witch FM13V Скачать руководство пользователя страница 13

Страница: 13 / 65

Safety - 12

FM13V/FM13X Operator’s Manual

Emergency Procedures

If an Electric Line is Damaged

If you suspect an electric line has been damaged and you are

on truck or trailer

, DO NOT MOVE.

Remain on truck or trailer and take the following actions. The order and degree of action will depend on the
situation.

•

Warn people nearby that an electric strike has occurred. Instruct them to leave the area and contact
utility.

•

Do not allow anyone into area until given permission by utility company.

•

Do not allow anyone to touch equipment.

If you suspect an electric line has been damaged and you are

off truck or trailer

, DO NOT TOUCH

EQUIPMENT. Take the following actions. The order and degree of action will depend on the situation.

•

LEAVE AREA. The ground surface may be electrified so take small shuffle steps with feet close
together to reduce the hazard of being shocked from one foot to the other.

•

Contact utility company to shut off power.

•

Do not return to area or allow anyone into area until given permission by utility company.

Содержание FM13V


































































Результаты поиска

Содержание FM13V

Отзывы:

Бренды по названию

Популярные бренды

Ditch Witch FM13V, Руководство оператора

Результаты поиска

Содержание FM13V

Отзывы:

Бренды по названию

Популярные бренды