EN
EN
Table of contents
disty
Notruf NEO
15
Commissioning and assembly
16
Inserting the batteries
16
Subscribe and pre-programm the alarm numbers
16
Assembly
18
Mode of operation
19
Make a direct call
19
Personal alarm
19
Cancelling a direct call/an alarm
19
Contact chain/alarm confirmation
20
Range warning
20
Battery warning
20
Alignment of the user interface
21
Troubleshooting
21
Technical data
23
Declaration of conformity
23
Safety information
24
14
Operating instructions
Operating instructions
15
Congratulations!
With
disty
Notruf stationär
you have purchased
a DECT/GAP telephone accessory device that
is easily operated at the push of a button
disty
Notruf stationär
is the direct connection to
your trusted persons
You determine who you would like to speak to directly in the
case of an emergency. You may pre-programm up to 5 telephone
numbers. To do this,
disty
Notruf stationär
must be first subscribed
into the DECT base station of your telephone (see page 16).
As soon as you press the alarm button,
disty
Notruf stationär
„wakes up“ and dials the first of the programmed telephone
numbers. You can speak immediately.
The party being called must confirm their acceptance of the call
by pressing the „#“ key on their telephone. If this confirmation
is not received because the receiver is not there, the line is en-
gaged or the answering machine is triggered, then
disty
Notruf
stationär
automatically calls the next pre-programmed number
until the emergency call is personally accepted and confirmed.
Once the alarm situation has been handled,
disty
Notruf
stationär
automatically shuts down after a few minutes. This
way, the device can remain operational for longer than a year
before the batteries need to be changed.
