3 / 9
Mounting Instructions and Battery Replacement
Allure UNIWAVE
The Allure UNIWAVE must be installed on a clean dry surface using either an adhesive strip (recommended for glass and other smooth surfaces) or by
fastening the backing plate using hardware that is appropriate for the mounting surface.
1. To remove the front cover of the unit, begin by loosening the security screw using an appropriately sized hex key.
2. Use a small flat screwdriver to unclip the fastening tab by inserting as shown below. Applying slight pressure towards the left to release the tab.
3. Once the tab has been unclipped, the front cover can be removed. Remove the batteries.
