Step 5. Fix Foot Plates (G) to the bottom of the assembled SEG frame by using Hex Screws (I) and Wing Nuts (J).
Step 6. Assemble the SEG graphics to one side of the frame by inserting the silicon edges into the grooves on the
side of the frame. (For double sided only) Carefully flip the frame and assemble the other side the same way.
Make sure the graphic is fully stretched.
Step 7. Carefully lift the the assembled backwall up to its standing position.
GRAPHICS
If you have any questions regarding our products, please visit us at www.displays2go.com or contact D2G customer service
844-221-3388.
Scan QR code to visit
the product page:
4 of 4
ASSEMBLY INSTRUCTIONS
8’X10’ SEG BACKWALL - SEG810WSGH
