IMPORTANT SAFETY INFORMATION:
This product has been designed for easy assembly and constructed for durability. Please take time to read and follow all instruc-
tions before start installing the unit. Be sure you fully understand all the steps needed to finish the
installation.
1. Position collapsed pop-up frame with thumb screw feet on the ground. Hold connectors and pull upward until it’s in fully
upright position. Secure the expanded frame by locking all 6 insert buckles. Locations are shown as circled below.
2. Assemble
(20) channel bars to all edges of the frame. Find the “T” shaped plastic connector on both ends of the
channel bar, and insert one end into the “T” slot in one connecting hub, then insert the other end. In the picture
below. “A” indicates the corner connecting hub, “B” indicates the middle connecting hub.
ASSEMBLY INSTRUCTIONS
SEG LIGHTBOX - FABRIC BACKLIT DISPLAY
1 of 3
THUMB SCREW
FEET
Ver. 09/17
