2. STORAGE ASSEMBLY:
Insert (2) cam screws into Panel F. Connect a Panel F to each
side of Panel E and secure them in place using cam locks.
Flip over the assembled base, insert (8) cam screws into
Panel D.
Connect Panel E and Panel F assembly with the base by
inser�ng cam screws into the corresponding holes, then use
cam lock to lock them in place.
Connect Panel G with the base using the same method.
How to install concealed hinges:
(a) Press the hinge cup into one flat-bo�omed hole in the door. Be
sure the edge of the hinge is parallel with the edge of the door.
(b) Drive wood screws through screw holes in the flange to fix the
hinge cup. Secure the other hinge cup in the 2nd bored hole in
door.
(c) A�ach the door with hinges assembled with Panel F. Align holes
in the hinge plate with pre-drilled holes in Panel F. Drive wood
screws into pre-drilled holes to fix the door panel.
A�ach door knob to Door Panel H on both doors.
1
2
3
4
Insert (8) cam screws into Panel A, and connect Panel A with
on top of the storage assembly. Secure Panel A with cam locks
from inside.
Parts needed:
Panel A (X1) Cam Screw (X20)
Panel E (X1) Cam Lock (X20)
Panel F (X2) Door Knob (X2)
Panel G (X1) Door Hinge (X4)
Panel H (X2) #6X1/2” Wood Screw (X24)
A�ach Door Panel H to Side Panel F on both sides.
4 of 6
ASSEMBLY INSTRUCTIONS
Ver. 04/18
