6
Displays2go
⚫
Do not let children climb onto the Digital Signage.
⚫
Keep the small parts away from children to prevent them from swallowing.
⚫
If the Digital Signage won’t be used for a long time, please turn it off and pull out the power plug.
⚫
To adjust the position of the Digital Signage, please disconnect all power cords and move slowly to
avoid tip over.
⚫
Do not scratch or knock the LCD with hard object, or twist, squeeze the LCD.
⚫
Do not turn on the unit immediately when it is moved from a place with low temperature to high
temperature, or else it will cause condensation and malfunction.
⚫
Before cleaning the Digital Signage, please pull out the power plug; wipe with soft cloth; do not
use industrial chemicals; prevent foreign matters from entering the machine. Improper cleaning
(such as cleaning solution, water) may damage the product, erase the printed information, and
even cause damage of the components if fluid flows in, resulting in machine failure.
⚫
If the unit displays the same screen for a long time or the moving picture has fixed text or icon, it
will leave ghosting on the screen and won’t disappear when the unit is turned off; it is normal and
isn’t covered by the warranty.
⚫
The power of the Digital Signage can be cut off by pulling out the plug.
⚫
If the LCD screen ruptures and the liquid splashes on the skin, please rinse for 15 minutes with
clean water immediately, and consult your doctor.
⚫
Do not apply pressure on the panel.
⚫
Use the Digital Signage properly: Use in proper lighting conditions; insufficient lighting or long
time watching will impair your eyesight.
⚫
When the plug or coupler is used as disconnection device, it should be easy to operate the device.
⚫
Insert the plug into the outlet properly, or else it may cause sparks and fire.
⚫
The technical specifications printed herein and on the packaging are subject to change without
prior notice. The Manual may be slightly different from actual operation, and the latter is
applicable.
Part and Interface
Packing List
Name
Qty
Digital Signage
1
Remote Control
1
CD disk
1
Power Cord
1
Interfaces
1.SIM Port 2. SD Port 3. Rj45 Port 4. USB Port 5. HDMI Port 6. ON/OFF Switch 7. Power port
Note: Please pull out the power plug before installing or disassembling the unit!
CAUTION
