8’ (92” x 185”) Flare
Assembly Instructions Page 4
Flare v2.0 Updated 1/23/2018
displayit.com 800.207.0311 After-Hours Emergency: Call or Text 678.723.5343
Diagram 3
9. To help stop wire shadows on the graphic, use
the provided snap-on wire management clips.
The curtain light clips may also be used for wire
management.
8a. Run two power cables as shown by the blue
and green lines in Diagram 2.
8b. Run the main power cables through the wire
pass-through and connect to the power supply.
Plug the cables into an AC outlet to test the lights.
11. Slide in two side screws and hand-tighten
with wing nuts.
Repeat steps 10-11 for second Base Foot.
10. Prop up the bottom of frame as shown in
Diagram 3. Place the Base Foot against the corner
of the bottom right of frame. Slide in two bottom
screws and hand-tighten with wing nuts.
