disperator EXCELLENT 550A-GKF Series, Руководство пользователя

Страница: 16 / 35

User Manual in Original
Dok. ref: 550A_GKF_am_sv_210525
DISPERATOR AB
Tel: 08-724 0160 E-mail: info@disperator.se
Mälarvägen 9, 141 71 Segeltorp Web page: www.disperator.se
16 / 35
8. Driftinstruktioner
The machine is only intended for crushing pure glass!
8.2. Daily Cleaning
DISPERATOR AB
Mälarvägen 9, 141 71 Segeltorp
Tel: 08-724 0160
info@disperator.se, www.disperator.se
Doc. ref:
Opera� ng Instruc� on
550A-GKen_210409
OPERATING INSTRUCTION
FOR GLASS CRUSHER
Disposer Control Panel
Daily Cleaning of Disposer
1. Attach a collection bag of strong
plastics to the machine outlet.
Use the pre-mounted elastic cord,
and make sure the bag fi ts tightly
against the seals on the outlet.
2. Press the green button (1) - the
glass crusher starts.
3. Depending on size, feed the
bottles one by one into the inlet
tube at every 5 - 10 sec.
4. When the crushing is completed
only the machine’s idle sound is
heard.
5. Press the red button (0) - the
glass crusher stops within 5 sec.
1. Use protective gloves.
2. Remove the bag with crushed
glass, and instead place a bucket
under the machine outlet.
3. Start glass crusher with green
button (1).
4. Insert a hose in the inlet tube
opening, and rinse with warm
water to remove beverage
residue and prevent bad odors.
5. If needed, empty the bucket and
repeat item 4 above.
6. Press the red button (0) - the
glass crusher stops within 5 sec.
7. Use the main electrical safety
breaker (placed on the wall/
bulkhead) to disconnect
electrical supply. Lock the
breaker with a padlock if you
need to leave the machine
temporarily before item 11 below
is completed.
8. Loosen the knob and lift off the
inlet tube from the machine
front panel. Make sure that the
area around the O-ring seal
on the tube, and also the area
around the front panel opening
to the interlock switch, is clean
and free from crushed glass.
9. Remove any foreign objects
(e.g. bottle caps, plastics etc.)
that may remain in the glass
crushing unit of the machine.
10. When the inlet tube is refi ted
and fi xed with the knob on the
front panel, also check that the
O-ring seal is intact and that the
key on the tube easily slides into
the interlock switch.
11. See section 9.3.2 of the user
manual, and check that the
machine´s automatic function for
collecting glass dust works.
12. Use the main electrical safety
breaker to connect the electrical
supply
The glass crusher is intended for crushing pure glass only
• What can be crushed: wine, beer, champagne bottles, jars and containers of glass
• What cannot be crushed: materials that can cause explosion, spread infection or
chemical pollution (e.g. lamps containing mercury)
• Non-crushable materials: metal, stone, wood, plastic, rubber, strings and the like
• What can be crushed: wine, beer, champagne bottles, jars and containers of
glass
• What cannot be crushed: materials that can cause explosion, spread infection or
chemical pollution (e.g. lamps containing mercury)
• Non-crushable materials: metal, stone, wood, plastic, rubber, strings and the like
8.1. Start and Stop