User manual in Original
Doc. ref: 500V_BAS_am_en_210524
DISPERATOR AB
Tel: 08-724 0160
E-mail: [email protected]
Mälarvägen 9, 141 71 Segeltorp
Web page: www.disperator.se
34 / 35
34. Secure the hood with 4 washers and 4 new lock nuts (25) The torque should be 21 Nm.
35. Mount hood over right-angle gear (51) and hood over motor (52), make sure that rubber strips
(53) are placed correctly.
36. The disposer is now ready to be remounted.
37. Make sure that the seal for the hood (08) is placed correctly before you move the disposer into
place. Use 6pcs of screws and nuts (22). See section 6.1.1 for the correct procedure.
38. Reconnect drain piping according to section 6.3. Make sure that the disposer is securely fixated
so it can withstand the start torque and the torque which occurs if the disposer ever gets stuck
(see section 6.1.2). Connect the electricity according to section 6.4.
39. Start up the disposer according to the startup procedure described in section 6.5.
All manuals and user guides at all-guides.com
