Dish TV S7070PVR, Руководство пользователя, Страница: 9 / 32

First Time Installation
08
Step 01 - Getting Connected
• Ensure the S7070PVR has been correctly connected to the Satellite Dish, and the TV.
See Page 07 .
Step 02 - Network Setup
• Either connect an Ethernet Cable from the Router to the S7070PVR, or select Set Up
Wi-Fi. See Page 20 for information on Network Setup.
• Select SKIP to skip the Network Setup, and progess to Region Select / Satellite Scan.
Step 03 - Region Select / Satellite Scan
• Select the Region closest to your location. Press OK to confirm selection and start the
Satellite Scan.
DO NOT press any buttons on the Remote during the Satellite Scan.
¹If the Welcome screen does not appear on the TV, go to Menu → Installation → Factory Reset → Yes. Default PIN is 0000.
This Receiver works with Satellite Dish. The Welcome screen should appear on the TV¹
when the S7070PVR is first turned ON. During the Initial Setup you will be prompted to
connect to the Network, and tune in the Receiver.