Dish TV S7070PVR, Руководство пользователя, Страница: 26 / 32

Troubleshooting Tips
25
No Power Indicator on the Front Panel
Possible Cause: Unplugged/Switched OFF.
Solution 1: Check the Power Supply is plugged into both the Receiver and Wall Socket
correctly.
Solution 2: Ensure the Wall Socket is switched ON and there is power available.
No Channels
Solution 1: If the Satellite Dish cable is NOT connected correctly, your Receiver will be
unable to scan. Ensure the Satellite Dish cable is connected correctly.
Solution 2: Perform a re-scan of the Channels.
1. Ensure the Satellite Dish cable is connected.
2. Follow the steps according to the Main Menu.
• Select Menu → Installation → Factory Reset → Yes.
Receiver is not responding to the Remote
Possible Cause: There are a number of reasons why your Remote may not be working.
This includes physical damage, battery issues, pairing issues, or issues with the infrared
sensor on the Remote or Receiver.
Solution 1: Batteries that are depleted, or incorrectly inserted are the most common
reason for a Remote to stop working, or work intermittently. We recommend replacing
the batteries as a first step, checking that the + and - ends of the batteries correspond
with the + and - markings inside the battery compartment of the Remote.
Solution 2: Ensure that the infrared sensor located on the Front Panel of the Receiver
has not been covered or obscured, and move any obstructions if necessary.
How to Reset the Receiver
Solution 1: Perform a Power Reset.
1. Unplug the Power Supply to the Receiver from the Wall Socket.
2. Allow the Receiver to rest for 30 to 60 seconds.
3. Reconnect the Power Supply.
Solution 2: Perform a Factory Reset.
1. Follow the steps according to the Main Menu.
• Select Menu → Installation → Factory Reset → Yes.
2. The Receiver will display the “WELCOME” screen, ready to setup.
WARNING! Performing a Factory Reset will remove all customer configured settings on
the Receiver; including Channels, and Network settings.