2
3
Inspired by
1. Release the locking clip and slide
the belt clip vertically from the
back of the walkie talkie body.
2. Remove the battery compartment
door.
3. Insert 3 x AAA 1.5V batteries,
taking care to ensure the + and –
markings on the batteries match
the markings in the product.
4. Replace cover and belt clip,
ensuring that they are secure.
Always remove all old batteries
before replacing with new batteries,
and follow instructions above.
Always remove the batteries if the
product is not to be used for a long
period of time.
Adults please take note!
Components
LED Torch
Antenna
Channel
Number
Channel
Selector
Call
Talk
Speaker
Torch
Mic
Display
On/Off
Belt Clip
(on back)
Walkie talkies
have been used for
many years. They were first
widely used by the military
and early models were heavy
and bulky. Nowadays they are
much smaller and lightweight.
Their use spread to the police
and fire service and now are
used by many people for
work or just fun!
Walkie talkies
work using radio
waves; they are
essentially two-way
radios. The radios you
listen to at home only
receive signals, but your
walkie talkies receive
and send out
signals.
3
CHANNELS
WITH LED
DISPLAY
1. To power on, press the ON/OFF
button (the walkie talkies will also
switch on automatically when the
batteries are installed). They will
beep and the display will show the
current channel number.
2. Press the CALL button once to send a
ringing sound (like a phone) to the
other walkie talkie. This alerts the
recipient that you want to talk.
3. To speak press the TALK button while
holding the walkie talkie
approximately 4-5cm from your
mouth. Do not hold the walkie talkie
Battery Installation
How To Use Your
Walkie Talkies
any closer, or speak loudly, as this
will cause distortion and make it
difficult for the other person to
understand what you are saying.
Release the TALK button once you
have finished speaking.
4. Press the TORCH button to switch on
the LED torch on the top of the walkie
talkie. Press it again to turn it off.
5. Press the CHANNEL SELECTOR
button for 2–3 seconds to change to
another channel. The display will
change sequentially from 1 to 2 to 3.
