21
21
ESIM022 User manual v1.1
View input
parameters
Config
Tool
This operation may be carried out from the PC using the
ELDES Configuration Tool
software.
For more details on how to manage the alarm/restore notifications, please refer to
10. ALARM/
RESTORE NOTIFICATIONS.
For more details on how to view system’s information that may include input state, please refer to
13. SYSTEM INFORMATION. STATUS SMS.
8.2.2 Temperature Sensor Mode
The system may be equipped with 1 temperature sensor intended for temperature measurement
in the surrounding area. The temperature value is automatically updated in accordance with the
set up period (by default – every 60 minutes). To set a different temperature update period, please
refer to the following configuration methods.
Set temperature
update period
SMS
SMS text message content:
PTEMP:temp-per
Value:
t
emp-per
– temperature update period, range
– [3... 71000000] minutes.
Example:
PTEMP:45
Config
Tool
This operation may be carried out from the PC using the
ELDES Configuration Tool
software.
Adding, Removing and Replacing Temperature Sensor
To add a temperature sensor to the system, proceed as follows:
1. Shutdown the system.
2. Wire up the temperature sensor to the terminals (see
2.3. Wiring Diagrams
).
3. Power up the system.
4. Enable the temperature sensor.
To enable the temperature sensor, please refer to the following configuration method.
Enable
temperature
sensor
Config
Tool
This operation may be carried out from the PC using the
ELDES Configuration Tool
software.
