Fig. 3
Audio Jack
5.
To secure the audio jack simply d
rill a ¼” hole
in panel, push threated
shaft through hole and secure with nut (See
Fig. 4
)
Fig. 4
Warning:
Jack may be left freestanding, but to be mounted, ensure
panel is
no thicker than 1/8”
otherwise shaft may not protrude enough
to engage with nut. If necessary, use dremel, sander etc. to thin panel,
Operation
1.
Turn ignition and r
adio “ON”
2.
Press “CD/AUX”
,
“XM”,
“SAT”
or “TAPE”
button on radio
3.
Music from external device will begin to play
4.
Connect 3 ft. audio cable (See
Fig. 5
) or similar to audio device. External
device playback is interrupted and music from audio device will play.
Fig. 5
audio cable
5.
Use radio volume control to set the playback level
6.
Warning: Playlist and Track selection is *NOT* possible from the Radio.
You must use the audio devices built-in controls to access audio files
.
7.
To listen to the tunes on external unit, simply disconnect 3.5mm audio
cable from jack and operate slave unit as customary
8.
If correct operation is confirmed go ahead and reinstall radio
