PRODUCT SAFETY & DISCLAIMER
READ ALL INSTRUCTIONS CAREFULLY BEFORE INSTALLING, FAILURE TO DO SO MAY CAUSE
PERSONAL INJURY OR DAMAGE TO PRODUCT AND/OR PROPERTY
•
This installation guide is provided as a GENERAL installation guide, some vehicles vary and
may require additional steps. We do not accept responsibility for third party labor charges
or modifications. Exercise due-diligence when installing this product.
•
We do not accept any responsibility for vehicle damage or personal injury resulting from
the installation of this product.
•
Careless installation and operation can result in equipment damage
.
Requirements:
Sirius Tuner module or slave player
Introduction
The AUX-HON03 auxiliary cable can be installed in any Honda-Acura vehicle with
a SiriusXM Tuner module (with or without subscription), external CD changer or
external cassette player. Users retain full use of the factory option plus the
ability to connect and play all kinds of audio devices including Smartphones, MP3
Players, iPods etc.
External CD player, CD changer, cassette player etc. required are not built into
the AM/FM radio, but rather installed in lower dash, armrest, trunk or hatch.
For more details, see
Frequently Asked question
section at the end of this
guide.
Installation
Remove radio to gain access to the connector. Vehicle specific radio removal
instructions are not part of this guide, but
available upon request
Warning:
Devices with
14-pin blue plug (See Fig. 1)
are
NOT compatible
. The
AUX-HON03 applies to vehicles with
14-pin white plug as seen in Fig. 1
Fig. 1
Honda 14-pin plugs
1.
With radio removed, disconnect
14-pin plug
(See
Fig. 1
) from radio
port (See
Fig. 2)
Fig. 2
radio 14-pin port
2.
Connect 14-pin plug removed in step1 harness 14-pin connector
3.
Connect harness 14-pin plug to radio port vacated in step 1 (See
Fig. 2
)
4.
Carefully route audio jack (See
Fig. 3
) to a location on the dash or
nearby panel where it will be mounted (within 3.5 ft.) This location will
vary based on vehicle and customer’s preference
