Fig. 14
Flush mounted to dash
4.
Connect installation harness Red wire to 12V Accessory supply.
B.
Bracket Mount
(No drilling)
1.
Locate a flat surface at location of choice within 3.2 ft. of module to
mount USB support bracket (See
Fig. 15
) using adhesive/tape or
screws (included).
Fig. 15
mounting bracket
2.
Insert USB cable male terminal through hole in bracket (See
Fig. 16
)
and connect to installation charging port (See
Fig. 12
)
Fig. 16
3.
Snap USB cable head (See
Fig. 16
) to bracket until flush (See
Fig. 17
)
Fig. 17
4.
Tuck and secure any extra wire away from moving parts and test
operation (
See Bluetooth Pairing and Connection
)
