Optional charging kit
Optional USB charging port can be added to your A2DIY-GM3x kit. Should you
decide on this add-on, we suggest one of 2 connecting options:
A
.
Flush to dash/panel
requires drilling a ¾” hole
B
.
Flush with Support bracket
(Mount USB terminal wherever your installation
demands without drilling)
A.
Flush to Dash or Panel
(drilling required)
1.
Drill a ¾” hole in the dash or panel using a step drill bit or equivalent
(See
Fig. 10
)
Fig. 10
Step drill bit
2.
Insert male terminal from supplied 3ft. cable (See
Fig. 11
) through hole
created in step 1 and connect to installation harness charging port
(See
Fig. 12
)
Fig. 11
Flush mount 3 ft. USB cable
Fig. 12
USB port
3.
Snap USB cable head (See
Fig. 13
) to hole created in step until flush
with mounting surface (See
Fig. 14
)
Fig. 13
USB head
