PRODUCT SAFETY & DISCLAIMER
READ ALL INSTRUCTIONS CAREFULLY BEFORE INSTALLING, FAILURE TO DO SO MAY CAUSE
PERSONAL INJURY OR DAMAGE TO PRODUCT AND/OR PROPERTY
This installation guide is provided as a GENERAL installation guide, some vehicles vary and
may require additional steps. We do not accept responsibility for third party labor charges
or modifications. Exercise due-diligence when installing this product.
We do not accept any responsibility for vehicle damage or personal injury resulting from
the installation of this product.
Careless installation and operation can result in equipment damage
.
Requirements:
cDr30 or CDR31 radio
Introduction
Porsche base radios (e.g., CDR30 and CDR31) may include optional 3.5mm AUX
jack and/or Bluetooth Hands-Free kit; which does not support music streaming
(A2DP). If looking to avoid wires dangling from the dash and support for more
attractive modern media formats, consider our A2D-CDR30 Bluetooth
music
streaming
add-on. This module supports any A2DP enabled Smartphone, Tablet,
Kindle etc. Once installed users pair device and wirelessly stream Apple music,
Pandora, turn by turn directions and more.
The A2D-CDR30 replaces factory AUX
jack (if so equipped) and also works in vehicles with or without factory Hands-
Free.
FYI:
Factory Hands-free option does not support streaming profile
.
See Frequently Asked question
at the end of this guide for more details.
Installation
Radio removal required to gain access to connectors. For radio removal
instructions click
for radio removal
1.
If present, disconnect 12-pin
GREEN
plug from radio main Quadlock (See
Fig. 1
) --- To disconnect, simply press release tab.
Fig. 1
Radio Quadlock
2.
Connect adapter 12-pin
BLACK
plug to vacated slot from step 1 (See
Fig. 2
)
Fig. 2
Factory Green plug (if present) remains disconnected
(See
Fig. 2
)
3.
Secure ground wire to radio chassis as seen in
Fig. 3
Use chassis screw to secure ground or connect to alternate ground source.
