Pairing
Pairing varies among devices but the basic steps are the same. This process is
done upon initial install and will not have to be repeated
1.
Turn Ignition and r
adio “ON”
LED inside adapter peephole will flash (pairing mode)
2.
On A2DP device: Go to
Settings, Wireless & Networks, Bluetooth
Settings
3.
Select
Bluetooth
and turn on.
4.
Then select Bluetooth settings
5.
Tap
Scan for devices
.
6.
Wait for the Bluetooth device name to appear (SKY) and select it.
LED inside adapter peephole will glow steady (paired)
Operation
1.
Turn ignition and r
adio “ON”
2.
Press “CD”, “CDC”, “AUX”
“MODE”
etc. button used to enter CD changer
mode (Bluetooth)
3.
Launch Smartphone or Tablet streaming application.
4.
Use radio volume control button to set playback level. If distorted,
lower volume on phone or if inaudible, raise volume on phone.
5.
Warning:
Playlist and Track selection is *NOT* possible from the Radio.
Use the smartphone built-in controls to access and control the audio
files.
6.
If correct operation is confirmed go ahead and reinstall radio or
access Panels/Carpet.
