PRODUCT SAFETY & DISCLAIMER
READ ALL INSTRUCTIONS CAREFULLY BEFORE INSTALLING, FAILURE TO DO SO MAY CAUSE
PERSONAL INJURY OR DAMAGE TO PRODUCT AND/OR PROPERTY
•
This installation guide is provided as a GENERAL installation guide, some vehicles vary and
may require additional steps. We do not accept responsibility for third party labor charges
or modifications. Exercise due-diligence when installing this product.
•
We do not accept any responsibility for vehicle damage or personal injury resulting from
the installation of this product.
•
Careless installation and operation can result in equipment damage
.
Requirements:
XM Tuner module with or without subscription
Introduction
They are thousands of car audio enthusiasts with at least one version of the
popular AUX2CAR in their vehicle. The AUX2CAR (PXDX) auxiliary input adapter
and PXDP (iPod2CAR) branded by
Peripherals, iSimple, PAC & NEO
allows
users to play their audio devices on the car stereo through a wired (3.5mm or
RCA) connection. The A2D-35 converts the AUX2CAR or iPOD2CAR wired
connection to a wireless solution which means user no longer has to physically
connect their audio devices. If your Smartphone or Tablet support Audio
Streaming Profile (A2DP) and own an AUX2CAR or iPOD2CAR, the A2D-35 is for
you! Simply pair audio device and enjoy the best sound possible on car speakers.
The A2D-35 converts the AUX2CAR or iPOD2CAR wired inputs to a wireless audio
streaming solution. (
Not for hands-free calls
)
Introduction
1.
Locate AUX2CAR or iPOD2CAR (vehicle must have one)
2.
Disconnect 8-pin DIN audio cable from module
Fig. 1
8-pin
Fig. 2
3.
Connect A2D-35 8-pin plug to Module 8-pin connector (
See Fig.2)
4.
Connect/Tap Red wire to an Accessory supply in car. (Not battery
supply)
5.
Secure module and proceed to next section.
