B
-
-
-
-
3
910228
DF
D-
2
S
/8
2.
Y-axis
Section
This section consists of the base (1), cover (2), leadscrew (3), y-axis (only for the DFD-2D/8)
(4) sections.
Fig. B
-
-
-
-
3
(1) Base
Section
This section is comprised of special cast iron parts and serves as the Y-axis section base.
(2) Cover
Section
The splash cover, duct, and air curtain are provided to discharge the cutting water and
splashed water out of the machine, protecting the mechanism against water.
(3) Leadscrew
Section
The ball-bearing leadscrew coupled direct to the AC servomotor is used in combination with
straight rails to move a slide base on which the Y- y- (only for the DFD-2D/8) and Z-axis
sections and microscope are mounted. The slide base is moved for cutting positioning purposes.
(4) y-axis Section (only for the DFD-2D/8)
The ball-bearing leadscrew coupled direct to the pulse motor is used in combination with
straight rails to move the Z2-axis section mounted table so that the Z2-axis section is properly
positioned relative to the Z1-axis section.
Cover section
Screw section
Base section
Y-axis section
Содержание DFD-2D/8
Страница 8: ...INTRODUCTION D F D 2 S 8 ...
Страница 10: ...A INSTALLATION D F D 2 S 8 A ...
Страница 17: ...A 7 910228 D F D 2 S 8 Illustration Of Transport Method Fig A 5 ...
Страница 18: ...B STRUCTURAL SECTIONS AND THEIR FUNCTIONS B D F D 2 S 8 ...