Intro-1
INTRODUCTION
About this manual
This Installation Manual describes the installation and adjustment procedures
of Automatic Dicing/Cutting Saws 5*2 Series Models DAD522, DAC552 and
DAD562.
To ensure safety
To ensure safety, be sure to thoroughly read and understand the contents of this
manual before installing and adjusting the machine.
Note that this manual is based on the software of version 7.00 and newer.
When installing or adjusting the machine, be sure to follow the procedures set
forth in this manual.
Be sure that the machine is installed and adjusted by a qualified person who
has completed DISCO's education curriculum (hereafter referred to as the
maintenance personnel).
Definition of a manager and an operator
This manual defines a manager and an operator as follows:
Category
Applicable
Personnel
Job
Manager
Management
representative
The person who is responsible for overall
management of machines and operators.
Maintenance
personnel
The qualified person who received DISCO
machine maintenance training.
Operator
Data maintenance
personnel
The qualified person who is responsible for
management of software data of the machine.
Operator
The person who operates the machine to
process workpieces.
Sample
