and pressing
ENT
button.
To start a new job, place a new master disc in the top drive,
the SRC drive
.
Then load as many recorders with high-quality blank media as needed.
F
UNCTIONS
1. C
OPY
The
Copy
function is the primary place to duplicate optical media.
In the
Hard-Drive-to-Disc
mode (the default setting), the LCD will display:
The copy is being made from the hard drive and specifically from
Partition A
.
In the
Disc-to-Disc
mode the LCD will display:
Notice there will be nothing to the right of
1. Copy
.
Pressing the
ENT
button will initiate a copy operation.
2. T
EST
The
Test
function is used to check whether a disc will successfully copy. It sim-
ulates the copying process. When concluded no data will be written to the
writer drives. This function operates in both
Hard-Drive-to-Disc
and
Disc-to-
Disc
mode.
1. Select the
Test
function using the
Up and Down
arrows.
2. In the
Hard-Drive-to-Disc
mode: load the drives with high quality blank CD-R
media and press the
ENT
button to start the process. The unit will ana-
lyze the master on the hard drive, and then any disc in the recorder
drives. A message will be displayed regarding the results.
3. In the
Disc-to-Disc
mode: Load the top drive
Src
with the master disc and
load the recorder drives with high quality blank CD-R media. Press the
ENT
button to start the process. The unit will analyze the master on the
Src
drive,
and then any disc in the recorder drives. A message will be displayed regard-
ing the results.
Upon successful testing, the following will display on the LCD. In this exam-
ple three discs were successfully tested. Any disc that passed the test will
automatically be ejected from the drives.
If the target blank disc has already been written to, or is damaged and can-
not be written to, the disc will not be ejected. If the data on the master CD will
not fit on the target blank disc then the disc will not be ejected.
3. T
EST AND
C
OPY
The
Test and Copy
function incorporates the first two functions into one opera-
tion. It is used to check whether a disc will successfully copy and then goes on
to do the copy. First, the copy process is simulated and then the data is actual-
ly copied to the blank media.
1. Select the
Test and Copy
function using the
Up and Down
arrows.
2. In the
Hard-Drive-to-Disc
mode: load the drives with high quality blank CD-R
media and press the
ENT
button to start the process. The unit will analyze
the master on the hard drive, and then any disc in the recorder drives. The
LCD will display the process number of discs that passed the test and then
proceed directly to the copy.
3. In the
Disc-to-Disc
mode: Load the top drive
Src
with the master disc and
1-888-800-4041
www.discmakers.com
T
07
Funct
oi
n
s
1. Copy
P:A
1. Copy
2. Test
OK: 03
