5. After selecting a track to copy press the up arrow until “End” appears. In this
example one track is selected and the time for this track is 2:41. If four
tracks were selected the screen would show “4 Trk” and give the total time
for all four tracks.
6. Press the ENT button and the Reflex 1 will ask if all the selections are made
for this CD. Use the up or down arrow to change between Yes and No.
Pressing ENT with No on the LCD will take the user back to Select Track.
Pressing ENT with Yes on the screen will start the copying of the track (or
tracks) to the target CD.
7. When the copying ends the unit will display “Burn Complete! OK: 01”. Press
the ENT button. The LCD will display “Continue edit next Disc? NO”. To change
to another CD, Load the top drive (reader) with another master disc, press
the up arrow to change the “No” to “Yes”and press ENT. This will take you to
the screen from step 3. Repeat steps 3 through 6 to put more tracks on the
CD.
8. When there are no more tracks to write to the CD leave the “Continue edit
next Disc? NO” set to “No” and press the ENT key again. The following screen
will appear:
Press ENT and the Reflex 1 will close the CD.
Note:
the Edit Track CD to CD Edit is the only function enabled for the Reflex 1 in
the Edit Track section.
11. S
ETUP
This function allows the user to specify specific parameters for copying discs.
There are 16 sub items. From the main menu screen pressing “ENT” will show
the sub heading, pressing the up and down arrows allows the user to move
between the settings.
1. Language:
allows the user to set English or Spanish as the display language.
2. CD Burn Speed:
allows the user to change the speed at which the unit burns
CD-R recordable media. By pressing the “ENT” button the current setting will
be displayed, the user can then press the up and down arrows to change to
the desired speed. Pressing the “ENT” button will set the speed. Press “ESC”
to go back to the main menu.
3. DVD Burn Speed:
allows the user to change the speed at which the unit
burns DVD-R and DVD+R recordable media. By pressing the “ENT” button the
current setting will be displayed, the user can then press the up and down
arrows to change to the desired speed. Pressing the “ENT” button will set the
speed. Press “ESC” to go back to the main menu.
4. Read Speed:
The read speed can be changed after the master disc is placed
in the reader drive. With a disc in the reader drive and “11.04 Read Speed”
showing in the LED window, press “ENT” then the up or down arrows to scroll
1-800-237-6666
www.discmakers.com
T
07
Select Track:
End
1 Trk 02:41
End edit disc
and burn?
YES
Close all discs
session?
YES
