Disan DS SUPER COMPACT 1,5 Скачать руководство пользователя страница 8

8

Central vacuum cleaning systems

INSTALLATION OF THE CENTRAL VACUUM CLEANER

Periodic 

filter cleaning

The system works perfectly only if the filter in the filter 

chamber is cleaned with particular care. Cleaning 

operations are carried out when the system is switched 

off.

If you intend to empty the dust container or the plastic 

bag after cleaning, first operate the filter cleaning 

devices and then wait a few minutes for the dust to 

deposit on the bottom of the container.

Manual operation

Manual cleaning of the filter must be carried out at 

regular time intervals, depending on the use of the 

system (e.g. every 1-2 week(s) if the system is used 

daily), before emptying the dust container or in any 

case if you notice a reduction in suction power.

Anyhow, filter clogging is signalled on the filter 

efficiency manometer (15) on the control panel of 

the central vacuum cleaner as well as by the red 

light (8).

If the hand of the manometer is to the right (green 

area) the filter is in good conditions. If the hand 

moves to the left (red area), the filter is blocked and 

this causes a reduction in its filtering capacity.

Filter self-cleaning system

An automatic filter shaking device (optional) is 

available for DS Super Compact central vacuum 

cleaners, ensuring the automatic self cleaning of 

the filter every 12 hours.

-

To start the command-operated filter shaking 

device , press the “Test” switch (14) on the control 

panel of the central vacuum cleaner.

We suggest performing this operation before 

emptying the dust container and in any case if you 

notice a reduction in suction power.

-

The automatic shaking device works only when 

the system is switched off.

Please notice: 

shaking times exceeding one minute 

do not improve cleaning but do contribute to an 

early wear of the filter.

Sequence procedure 

1.

Lower the blocking bracket (10).

2.

Energetically raise and lower the knob (9) with 

one hand, several times (approx. 10-15 times).

3.

Bring back the blocking bracket (10) to its original 

position.

ORDINARY MAINTENANCE

(by the person in charge of the central vacuum cleaner)

The central vacuum cleaner must be installed and 

hooked up by an authorized installer. Instructions 

for a correct installation of the system are given in

the  corresponding  handbook  “DESIGN  - 

INSTALLATION – INSPECTION OF DS SUPER 

COMPACT  AND  DS  MODULAR  SYSTEMS”.

13

15

Z 803

10

9

Z 804

Содержание DS SUPER COMPACT 1,5























Отзывы: