10
Central vacuum cleaning systems
Check whether the filter shaking device works
properly:
1.
Keep pressed for a few seconds button (14) on
the control panel of the central vacuum cleaner.
2.
If noisiness or the emission of vibrations is higher
than normal or in any case excessive, contact
the installer.
Functional check
of the turbine
Check whether the turbine works properly:
1.
Keep pressed for a few seconds button (4) on
the control panel of the central vacuum cleaner.
2.
If noisiness or the emission of vibrations is higher
than normal or in any case excessive, contact
the installer.
EXTRAORDINARY MAINTENANCE
(by the installer)
Perform the following controls every year:
Filter control
and replacement
Stages to disassemble the lid:
While the system is switched off, detach the hose
(23) from the lid fitting (21). Lower the blocking
device (10). Unblock the locking hooks (11) and lift
the lid (1) together with the filter (27).
If there is an automatic filter shaking device,
disconnect the plug (25) from the socket (26) on
the back of the central vacuum cleaner.
Functional check of the automatic
filter shaking device
14
Z 809
4
Z 810
27
11
21
23
2
10
1
Z 811
25
26
Z 812