HOW TO OPERATE
7
WARNING:
FULLY ASSEMBLE BEFORE OPERATING.
Turn Quick Cord Release
for easy cord removal.
Store cord in cord guide
(see Features - Page 5)
to keep out of the way
while vacuuming.
1.
CORD RELEASE
2.
Turn the height
adjustment knob to
match the surface
being cleaned.
IMPORTANT:
FOR
EASIEST ADJUSTMENT,
PLACE CLEANER IN FULL
UPRIGHT POSITION.
To release handle, push the
handle release pedal located
on the lower left side of the
cleaner.
4.
HANDLE RELEASE
PEDAL
Move the handle
and adjust it to
the desired
position for (a)
operating the
cleaner, and (b)
lowering handle
to clean under
furniture.
NOTE:
Rotating brush
could cause area rug fringe to become tangled
within cleaner. Use caution when vacuuming
throw rugs with fringe.
a
b
5.
3.
Plug cord into electrical outlet.
Turn cleaner on by depressing
foot pedal located on the back
left side of the cleaner.
ON/OFF PEDAL
FLOOR/CARPET
CLEANING
HEIGHT ADJUST LEVER
Remove the hose from the
tool caddy.
2.
Choose any of the handy accessories
or use the hose alone. Simply push
the attachment firmly onto the end of
the wand or hose handle. To remove
tool, twist and pull apart gently.
ABOVE FLOOR CLEANING
1.
Cleaner must be in its upright
position to raise brushroll.
3.
CAUTION:
Brush agitator continues to rotate while hose is removed or in use and at all times while cleaner
is on. Keep hair, loose clothing, fingers, and all parts of body away from brush area while cleaner is on.
Cleaner must be in the upright position to lift the rotation brush off the carpet when cleaning above the floor.
8
HOW TO OPERATE: CONTINUED
If additional length is
needed,
use the
extension wand and
crevice tool.
Pull
crevice tool out of
extension wand. Use
extension wand and
crevice tool together
or separately.
4.
EXTENSION WAND
Use the carry handle on
the dirt container to
move the cleaner from
room to room.
NOTE:
Verify dirt cup is secured
in place BEFORE lifting
cleaner.
1.
CARRY HANDLE
DIRT CONTAINER & FILTER: REMOVAL & REPLACEMENT
Hold dirt container over garbage can and
press clean release dirt container button
to empty. Make sure container bottom
center opening is clear of debris. Snap
dirt container bottom back into place
after emptying.
WARNING:
TO REDUCE THE RISK OF INJURY FROM MOVING PARTS - UNPLUG BEFORE SERVICING.
NOTE:
Unplug cleaner before changing filter.
NOTE:
Rinse foam filter once every month. If vacuum is used frequently, the filter may require more frequent cleaning.
NOTE:
For best performance, replace pleated filter yearly.
F8
FILTER TYPE
For F8 filter replacement, please visit our website at www.dirtdevil.com to buy
online or call customer service at 1-800-321-1134.
Twist and lift to remove dirt
container lid.
Press dirt container
release button on front
of cleaner to remove
the dirt container.
1.
2.
1.
EMPTY DIRT CONTAINER
CLEAN PLEATED FILTER
2a.
2.
Tap the lid on the inside of a
garbage can to remove
excess dust and dirt from
filter. DO NOT APPLY WATER
TO PLEATED FILTER!
1.
Remove foam filter from
dirt container.
2.
Hold filter under running
water to wash. Ring excess
water out of filter. Allow filter
to dry for at least 24 hours.
CLEAN FOAM FILTER
