Caution
TO REDUCE THE RISk OF PERSONAl INjURY - UNPlUg BEFORE
ClEANINg OR SERvICINg.
If a minor problem occurs, it usually can be solved quite easily when the
cause is found by using the checklist below. If not please call the Customer
Care Line on 0330 026 2626.
PROBLEM
POSSIBLE SOLUTION
Why won’t the carpet
washer turn on?
Why won’t the carpet
washer pick up solution/
spills?
Why won’t the solution/
clean water dispense?
Why won’t the brushes
rotate?
Belt may have broken, check and replace.
Check the brushbar for blockages.
It may not be plugged into the electrical socket correctly:
ensure that the plug is pushed in securely and switched on.
The power button on the carpet washer may not be fully
depressed.
If the carpet washer cuts out during use, disconnect from the
electrical socket, allow to cool for one hour. Clean the filter,
empty the dirty water tank.
The float in the dirty water tank may have been activated.
Empty the dirty water tank if full. If the dirty water tank is not
full switch the carpet washer off and wait for the float to settle
before re-starting.
Ensure the dirty water tank is fitted correctly and nozzle
cleaning door is closed.
Check the nozzle for blockages.
Check the brushbar for blockages.
Ensure the clean water tank is fitted securely.
The solution/clean water tank may be empty.
Ensure the dirty water tank is fitted securely.
18
