If a minor problem occurs, it usually can be solved quite easily when the
cause is found by using the checklist below.
Cleaner won't run.
Power cord not firmly plugged
into outlet.
Blown fuse.
Check the fuse in the plug if this
needs replacing, always replace
with a britsh13amp fuse.
PROBLEM
POSSIBLE CAUSE
POSSIBLE SOLUTION
CAUTION
To reduce the risk of personal injury - Unplug before cleaning or servicing.
Plug unit in firmly.
Thermal protector activated.
Check the vacuum cleaner for
blockages. Allow the vacuum
cleaner to cool for approximately
1 hour (if you have cleaned the
filters please wait 24 hours for
the filters to fully dry before put-
ting back into the machine).
The Performance Indicator
is red or the cleaner won't
pick up or low suction.
Dirt bin not installed correctly.
Dirt bin full.
Empty and clean the dirt bin.
Review dirt bin removal and
replacement.
Clogged brushbar.
Remove brushbar and clean.
Broken or worn belt.
Replace belt.
Clogged filter.
Remove filter and clean.
Nozzle/brushbar clogged.
Check nozzle/brushbar; remove
obstruction/clog.
Hose clogged.
Remove hose; remove clog.
Dirt bin full.
Clean and empty dirt bin.
18
Dust escaping from
the cleaner.
Dirt bin not installed correctly.
Review dirt bin removal and
replacement.
Hose clogged or not
installed correctly.
Check hose for clog and review
hose installation.
Filter clogged or not
installed correctly.
Clean filter and review filter
removal and replacement.
Brushbar not turning.
Brushbar worn.
Replace brushbar.
Broken or worn belt.
Replace belt.
