Dirt Devil DDHV6, Руководство пользователя

Страница: 5 / 12

---
dirtdevil.com.au
5
---
Operation
How to use
1. Remove the vacuum cleaner from the charger.
2. Make sure the dust filter is installed before you use the appliance. To check that the dust filter
is installed, open the front nozzle by pressing the dust container release button and remove the
nozzle. With dust filter in place, slide the nozzle back into position.
3. To operate the appliance, move the On / Off switch into the
On
position.
4. After use return the On/ Off switch into the
Off
position.
5. The small brush and the crevice tool are used to clean narrow difficult to reach places.
These tools can be inserted into the nozzle opening.
6. When all four LEDs in the battery charge indicator light up, the battery is fully charged.
The fewer LEDs illuminated, the lower the remaining battery capacity.
7. If preferred, the charger can be wall mounted.
Important:
If during operation of the appliance, only one LED lights up, this indicates
that the battery capacity is low. When this occurs, the battery should be
recharged.
VEC-101 & 102 User Guide.qxd:User guide 12/11/09 16:48 Page 4
crevice tool
brush
Operation