77
BEF
O
RE
USE
CAUTION
Before vacuuming, make sure that the fitted tool/
accessory suits the surface to be cleaned. Also observe
the flooring manufacturer's recommendations.
IMPORTANT:
Risk of injury! Only attach the tool/accessory if the appliance is not connected to the power supply. The
cylinder vacuum cleaner could be switched on by accident.
*(Some models only)
1. Attach the selected tool/accessory to
the bottom end of the telescopic tube
(Fig. 3/A1) or hose handle (Fig. 3/B1).
2. Insert the end of the suction hose into
the intake opening (Fig. 4/A) of the
vacuum cleaner until you hear and feel it
locking into place.
If using the telescopic tube:
3. Insert the hose handle into the upper end
of the telescopic tube (Fig. 4/B).
4. Adjust the length of the telescopic tube
(Fig. 4/C). Press down the release latch
on the tube to do this. Then extend the
telescopic tube to the desired length.
Let go of the release catch while pulling
until it locks in place. You will hear
a distinct click.
3.2 ASSEMBLY
3
4
*
DD_Real Power M28_OUTPUT-RK.indd 7
26/03/2015 10:48
