Dirt Devil Bagline M7050, Руководство по эксплуатации

Страница: 26 / 34

26
3 Operating
1. Push on the desired nozzle, Z Chapter 2.2, "Assembly"
or Z Chapter 2.3, "Using other nozzles (accessories)" .
2. Remove the cable, by holding the plug, until the yellow
mark is reached (Fig. 10/1).
3. Switch on the cylinder vacuum cleaner using the on/off
switch (Fig. 11/3).
4. Turn on the suction using the suction controller
(Fig. 11/2).
5. Adjust the carpet/hard floor switch (Fig. 12) depending
on the type of flooring:
- Hard floor (Fig. 12/A)
Laminate flooring, tiles, PVC flooring, etc.
- Carpet (Fig. 12/B)
Long and short pile carpets, runners, etc.
6. To vacuum, pull the cylinder vacuum cleaner behind
you like a sledge. Observe the corresponding
recommendations of the flooring manufacturer.
WARNING:
If the red mark (Fig. 10/2) is visible, use the cable retract
button (Fig. 11/3) to draw the cable in again up to the
yellow mark. Otherwise the cable can break off. There is
a risk of electric shock.
NOTE:
You can quickly reduce the suction power with the
secondary air controller (Fig. 13/1) if less suction power
is required or e. g. to release objects that have been
sucked in.
Fig. 10
1
2
Fig. 11
1
2
3
Fig. 12
B
A
Fig. 13
1
02_M7050_gb.book Seite 26 Donnerstag, 22. März 2007 3:23 15