DirekTronik 20109919, Руководство по эксплуатации

Страница: 21 / 28

21
Operating Instruction
In the parameter configuration area, select the serial port number that the serial line
connects to the PC
Baud rate: 115200 (default)
Data location: 8.
Stop bit: 1
Check bit: no
Then can input commands in the command input area to control the local or remote
receiver
Instructions:
1. All commands start from “#”, command head “%c”: “d” parameters, “l” lock,
“s” save.
2. The “_” in the commands cannot omit. Parameter: %d: 0 means ALL.
3. Command head & Parameter1 & Parameter2... need to add one “SPACE”.
The following table is only an example. Please refer to the list of instructions.
Instruction
description
instruction parameter 1 parameter 2 parameter 3
Video switch #video_%c out%d in%d matrix=%d
Audio Mode Switch #audio_%c in%d / enc=%d
EDID #EDID_%c In%d cfg=%d /