DirekTronik 20109919, Руководство по эксплуатации

Страница: 20 / 28

20
Operating Instruction
10. IR system
The matrix can pass the IR signal through the IR system to the HDMI source or pass the IR signal
from the HDMI source to the HDMI sink
Dual way IR using:
Step1: “IR IN” is for UTP output, “IR OUT” is for input channel
Step2: “IR IN ALL” Controlled by all input IR; “IR OUT ALL” Controlled by all output IR.
Step3: Receiver support connect with IR receiver to control the Matrix by remote
Step4: Matrix IR channel “IR IN ALL” support connect with IR-RX cable to control the Matrix by
remote
11. Command Control
Control software operation:
The serial control software is illustrated with SSCOM32 as an example.
Basic Settings:
Double-click the software in the installation package to run specifically (as shown in
figure 1 below) and install the RS232 software on the computer.
Enter the main interface of the software, as shown in the figure below.