Operating Instructions
6. LED status indicator instruction
1. The device includes two kinds of LED status indicator: green power indicator and blue data
transmisson indicator
Power LED: Green, indicator light always on during power on, indicator light out when power
off
Action LED: Blue, indicator light blinks at 4Hz per second during wifi data transmisson,
indicator light always on when no data transmisson
2. Reset buton: the reset button hidden inside the device, Press and hold 8s until you see the blue
status indicator turn off. Release the button, complete the factory reset.
NOTED:
1. When using the device first time, need match TX and RX, when power on, firstly connecting
loop out of TX and output of RX via HDMI cable, then short press the built-in reset button of RX
and TX in turn, waiting for the blue indicator blinks with nornal frequency, means match succeed,
at this time connecting input and output to display image normally,
2. If the device has been matched or used before, reset the device firstly, then match,
3. If the device can not display image after matching, suggest to restart.
7.Video output interface instruction
1. When the device power on and start to connect, the output interface of RX display below:
2. Interface of searching signal from input
6
Operating Instructions
