User’s Manual
PSE-SW5G2280HM
MSTRONIC CO., LTD.
4
Please note green connector is capable of 12A max. If more current is required, use 4 pin DIN
connector for up to 15A.
Ports 1~4 will deliver DC power over the Ethernet cable as Mode B detailed as below:
* Data pair A on line 1 and 2
* Data pair B on line 3 and 6
* Data pair C plus V+ on line 4 and 5
* Data pair D plus V- on line 7 and 8
Ports 5 will deliver DC 24V power over the Ethernet cable as Mode A+B detailed as below:
* Data pair A plus V+ on line 1 and 2
* Data pair B plus V- on line 3 and 6
* Data pair C plus V+ on line 4 and 5
* Data pair D plus V- on line 7 and 8
The terminal block on rear panel should be wiring as:
Model
Input Voltage
(REAR)
Output Voltage
(Port 1~3)
Output voltage
(Port4~5)
802.3af/at
Isolated
PSE-SW5G2280HM
18-32VDC
56VDC
(regulated)
24VDC
(regulated)
Yes
(port 1~3)
No
*Ethernet Port Wiring
The PoE switch supports one RJ-45 uplink (port 1 with 802.3at PSE) and four RJ-45 ports (port 2~3
with 802.3at PSE, and port4-5 with 24V passive PSE) with automatic MDI/MDI-X crossover,
auto-sense the speed and duplex for 10Base-T, 100Base-TX or 1000Base-T connection. Automatic
20100851
