background image

 

1.

 

INTRODUCTION

 

The Smart USB Multi-Charger w/ LAN, SUMC08L / SUMC16L, is a central unit that 
can recharge the battery and manage the contents on multiple smart devices (Smart 
Phones, Tablets, Portable Batteries, Fitness Band

…) 

over a company or corporate 

network. Previously, each of these smart devices had to be individually connected to the 
wall socket and manual sync its contents which was tedious and time consuming. With 
the Smart USB Multi-Charger w/ LAN system, you can easily recharge the battery and 
manage its content efficiently and cost effectively. 

 

A single Smart USB Multi-Charger SUMC08L / SUMC16L can charge and sync up to 8 
or 16 smart devices. Up to 2 additional units can be daisy chained to together so that 24 
or 48 smart devices can be manage as a group. Over a single local network, more than 
12,000 smart devices can be managed together. 

 

The Smart USB Multi-Charger SUMC08L / SUMC16L offers a space saving and safe 
method of recharging the batteries of the smart devices and mobile power banks. For a 
single series of smart devices, uniform syncing of data or application can be done for 
effective so that managing of smart devices for the enterprise or commercial usage. 

 

As an added convenience, the Smart USB Multi-Charger is design 1U height for easy 
installation on the server rack cabinet. The costs saving of the Smart USB Multi-Charger 
are in the space saving, managing of multiple power adapters, and the ease of maintaining 
its operation. Additional specifically designed cabinet box or cable management 
accessories options are available.  

 

2.

 

SAFETY INFORMATION

 

Please read, understand, and follow all the safety information contained in this guide 
prior to using our product

.

 

2.1

 

Indoor Use  

This product is intended for indoor use plugging into the standard 100~240VAC, 
50/60Hz power outlet. Any misuses could damage the product and/or create unsafe 
operating conditions

2.2

 

Location 

 

Select a location where the airflow is not obstructed. 

 

Place the product on a flat, level surface at least two feet from any heat source, such as ranges 
or heater. 

 

Keep all liquids away from the product. 

 

2.3

 

Electrical 

 

Plug the product into a grounded, polarize electrical outlet. Do not alter the ground plug or polarized 
plug blades. 

Содержание 121-8050

















Отзывы: