DirecTV R15, Руководство пользователя

Страница: 26 / 69

CHAPTER 1
18
25
Programming Your Remote Control
You can program the DIRECTV Remote Control to operate your TV power, volume and
mute, additional equipment such as a DVD, VCR, stereo, or second TV or DIRECTV Plus
Receiver.
1) Press MENU to display the Quick Menu.
2) Highlight Settings and press SELECT.
3) Highlight Setup and press SELECT.
4) Press SELECT on Remote in the left menu.
5) Follow the onscreen instructions to program your remote for your TV or additional
equipment (AV1 and AV2).
Once your remote is programmed to work with your TV, the VOL and MUTE key control
the TV regardless of the slide switch position. If you would like to change the VOL and
MUTE to work with another component, you can. Simply set up your remote to work with
the component, and then move the slide switch to the position you would like to lock the
VOL and MUTE keys to. Point the remote away from your DIRECTV Plus Receiver and
press and hold MUTE and SELECT until the light near the slide switch blinks twice (about
5 seconds). Enter 9-9-3. The light will blink twice, indicating the VOL and MUTE are now
locked to the chosen component, no matter what position the slide switch is in.
Factory Defaults
To reset all the functions of the remote control to the factory defaults, follow these steps:
1) Point the remote away from your DIRECTV Plus Receiver and components. Press and
hold MUTE and SELECT until the light above the slide switch on the remote fl ashes
twice (about 5 seconds).
2) Enter 9-8-1. The light on the remote will fl ash twice, indicating you have cleared AV1,
AV2 and TV modes.
Programming Your Remote Control