Directus Prodigy One NN-SC-1001, Руководство по установке

Страница: 7 / 15

Locate and pull back 4 mounting tabs for front faceplate. These will be identified by
small pull tabs with de-tents in them to keep the faceplate clipped on.
Note: A small pick tool can be used to free the tabs.
Once faceplate has been removed, place LCD assembly aside and locate two pieces
shown in
Fig
One is LCD plastic mount (black) and the other is the touch panel glass. Place black
plastic frame into original LCD frame (metal) as shown below in
Fig. with the ribbon cable groove positioned at the bottom of original LCD frame
(metal).
Next, place touch panel glass into plastic frame with ribbon cable facing up as shown in
Fig. ( Note: foam gasket will be face up.)
Re-assemble faceplate with touch panel glass as shown in
Fig.
Once assembled, remove 4 board mounting screws as shown in
Fig.
(You will no longer need them)
A
b
A
B
C