Directus Prodigy One NN-SC-1001, Руководство по установке

Страница: 15 / 15

6. ONCE INSTALLATION IS COMPLETE, TEST ALL FUNCTIONS OF OEM RADIO AND NAVI-
GATION
TO ENSURE THAT THEY ARE OPERATIONAL. (NOTE: NAVIGATION SYSTEM WILL BE THE
ONLYFEATURE THAT IS TOUCH SCREEN OPERATIONAL.) TO SWITCH BETWEEN RADIO
AND
NAVIGATION FUNCTIONS PRESS THE LOWER LEFT CORNER OF THE NEWLY INSTALLED
TOUCHSCREEN FOR 3 SECONDS.
7. It is possible that the newly installed touch screen will need calibration before use. To perform
this please follow below instruction:
Use a USB mouse plugged into USB HOST on the Prodigy One module to exit the navigation
software. Once at the MAIN screen for prodigy one CLICK the NEXT button on the lower right
side. On the next screen you will see SETTINGS. CLICK the SETTINGS button and then enter
the installer password of 7777. Click OK. CLICK the CALIBRATE button. A white screen will
appear with a crosshair. Use your finger to press the crosshair, as you press it may move to
another location, continue to press the crosshair until it is no longer there. One it has
disappeared, press the exit button. Your newly installed touch screen should be fully
calibrated now. All other settings in the SETTINGS screen are pre -programmed for
Nissan/Infinity. No need to access any other settings. If settings are changed Prodigy One
module may become unresponsive to Nissan/Infinity interface module. (NOTE: do not pass
the installer password of 7777 on to end user as they may change the settings, rendering the
unit inop.) If this happens please contact technical support.