DirectOut Technologies PRODIGY.MP, Руководство пользователя

Страница: 34 / 130

page 34 of 130 Prodigy.MP Manual - Version 2.0
DANTE.IO
Three network ports are available for transmission of audio signals (Dante / AES67).
The built-in network switch can be operated in three modes:
• Switched (all ports in the same network)
• Redundant (1 = Primary, 2 = Secondary, 3 = Primary)
• Red_Sec (1 = Primary, 2 & 3 = Secondary)
The switch will be configured automatically by selecting the respective operation
mode in Dante Controller.
PRI (1) RJ45 socket (1 Gbit/s)
Network interface - connect here for network
transmission. Primary Port when used in redundant
operation.
SEC (2)
RJ45 socket (1 Gbit/s)
Network interface - connect here for network
transmission. Secondary Port when used in
redundant operation.
PRI (1)
SEC (2)
LED orange - indicates the link state of the
network connection.
(ON) = device link active
(OFF) = device link not active
PRI (1)
SEC (2)
LED green - indicates the activity state of
the network connection.
(ON) = data sent or received
(OFF) = no data transmission
PRI / SEC (3) SFP cage
Insert SFP transceiver here and connect to the
network.*
Primary or secondary (selectable) port when used in
redundant operation.
* See p 18 for SFP-transceiver that are available by DirectOut.
NOTE
If redundancy is being used, secondary interfaces should be connected to a
second separate network. Secondary interfaces cannot communicate with primary
interfaces.