15
© 2018 Directed. All rights reserved.
White Parking Light
This wire should be connected to the parking lights wire in the ve-
hicle. It activates when the system is armed/disarmed, and when
the alarm is triggered, It can be set for a (-) or (+) output. See
the White/Brown parking light input wire for setting light flash
polarity.
White/Brown Parking Light Input
This wire is used to select (+) or (-) parking light output:
•
(+) parking light:
Connect this wire to constant 12V from
the vehicle
•
(-) parking light:
Connect this wire to chassis ground from
the vehicle
Red (+) 12V Constant
This wire supplies power to the unit’s micro-controller. Remove the
supplied fuse before connecting to the (+) terminal of the battery
or another constant (+) 12V supply. Make sure to replace the fuse
when all connections have been made.
Note:
Always use a fuse within 12 inches of the point from which
you obtain (+) 12V. Do not use the 5A fuse in the harness for this
purpose. This fuse protects the module only.
Black (-) Ground
This wire is the unit’s source of ground.
Do NOT
connect this wire
to any factory ground points; they can cause noise and/or volt-
age drops which can affect system performance. Ground the unit
and any accessories to the same point in the vehicle (prefera-
bly the kick panel). Scrape away any paint and make your own
ground with a screw and a star washer.
